· Exclusively for corrugated boardwith non-stop bottom feede.
· Accurate registration from E flute to double-wall AB flute.
· Complete stripping by a pair of male and female stripping forms and automatic grip edge waste removal.
· High productivity is available for short run and long run job.
· Safety devices protect operators and dual safety system stops machine run even power iscut off.
· All tooling set form outside of the machine.
•Specifications
MAXIMUM SHEET SIZE
1100 x 1600mm
MINIMUM SHEET SIZE
450 x 600mm
MAXIMUM CUTTING SIZE
1080 x 1600mm
MINIMUM GRIPPER SIZE
10mm
INSIDE SIZE
1120 x 1648mm
MAXIMUM OPERATIONAL PRESSURE
350tons
MAXIMUM CALIPER OF CORRUGATED BOARD
11mm
MAXIMUM SPEED
5000i.p.h
REQUIRED POWER SUPPLY
34kw(MAIN MOTOR 22Kw)
NET WEIGHT OF MACHINE
32tons
•Floor Plan
•Stripping Section
With quick set(option),the male die can be set andfixed firmly form operation sied.
Lower strippin from can be locked with ratchet handle form opration side.
Upper and lower stripping form can be inserted into the machine form operation side to shorten setup time and for higher safety.
•Press Section
Selected material and durable design.
Precise and stable diecutting.Intermediate drive system to allow precisely controlled acceleration and deceleration of the gripper bar.
•Cutting Chase & Cutting Plate
Hard backed cutting chase to enable short set up time.
Soft plate can be mounted on the cutting plate for repeat order.
•Knock-off Section
Knock-off plate can be set and fixed from operation side without entering the machine.
•Feeder Section
Well designed for corrugated board based on customer's request.
Suction head locating under bottom sheets.
Feed roll system to properly locate the sheets in to the regiseter position to the front lay, even with warped sheets.
•Grip Edge Waste Removal Device
Finally, the grip ede waste is removed from spike pins and transferred out of machine on the conveyor system.
•Delivery Section
The blank completely stripped and wasted is delivered by batch conveyor correctly counted.
